|
Product Details:
|
| Production Capacity: | 2000sqm | Warranty: | 1 Years |
|---|---|---|---|
| Automatic Grade: | Automatic | Tension: | 220V |
| Highlight: | fiber cement board machine,sheet forming machine |
||
waterproof 2-20mm fibre cement board machine concrete core drilling equipment machinery
Application:
Interior and exterior partition on steel or concrete structure building.
For New Construction, Additions,or Renovations.
Special Features:
Different Wall Thickness: 60mm, 75mm, 90mm,100mm, 120mm, 150mm,180mm.
Maximum width: 610mm.
Length: According to your demands, engineering requirements, and shipment conditions.
We not only can supply automatic mgo board production line in China ,but also raw materials and technology for manufacture magnesium oxide boards.
We are professional manufacturer of different kinds of lightweight wall panel machines----precast hollow core wall panel machine, eps concrete sandwich wall panel machine, ceramsite block machine, fence wall panels made of construction waste etc. Our advantage is that we not only make the machines, but also make the panels, so we have rich experience.The most important part of our advantage is not only about the machine, but also about the formulation. How to make the best-quality panels at the lowest price according to the materials which the customers have in their countries is our main purpose. We can make the best formulation for our customers because we have rich experience in this field. The materials of making this kind of panels can be cement, fly ash, leca, perlite, eps, gypsum, Mgo, Mgcl2/Mgso4, wood saw powder, crushed plant straws, etc.
1) Product quality: product quality is priority to the international standard GB/T9775-1999 (equal to European Standard).
2) The gypsum board which produced by the gypsum board production line is heat-resistant, fire-resistant, insulated, light, nonpoisonous, little pollution, adjusting the humidity of the room.
3) We can offer a basket of services of design, producing, installation, commissioning and training, as well as turnkey project for customers.
|
No. |
Test Item |
National standard |
Wall panel testing |
|
1 |
Compressive strength |
≥3.5MPa |
≥3.7MPa |
|
2 |
Drying shrinkage |
≤0.6mm/m² |
0.37mm/ m² |
|
3 |
Hanging force |
≥1000N 24hours No 0.55mm crack in 24hours |
≥1000N 24hours No 0.55mm crack in 24hours |
|
4 |
shock resistance |
without crack shocked by 30kgs sandbag five times |
without crack shocked by 30kgs sandbag five times |
|
5 |
The bending failure load |
≥1.5 times of the self weight of the wall panel |
≥2.5 times of the self weight of the wall panel |
|
6 |
radioactivity |
Inner radiation index Ira≤1.0 Outer radiation index IY≤1.3 |
Inner radiation index Ira≤1.0 Outer radiation index IY≤1.3 |
|
7 |
density |
≤90kgs/m² |
≤43kgs/m² |
|
8 |
Air insulation of sound |
≥35dB |
≥43dB |
|
9 |
Fire resistance limit |
≥1 h |
≥ 1h |
| Type | D Density (g/cm3) |
Water absorption % |
Water content % |
waterprooftness % |
expansion ratio | noninflammability | f |
| Low density | 0.8≤ D≤ 1.1 | --- |
≤ 12 | __ |
≤ 0.25 Autoclaved and curing products ≤ 0.5 |
meet GB8624 Grade A | |
| Medium density | 1.1≤ D≤ 1.4 | ≤ 40 | __ |
24H checking allow damp mark on the back of the board, but no water drop | |||
| High density | 1.4≤ D≤ 1.7 | ≤ 28 | __ |
| Compressive Strength | ~20 MPa (3, 000 PSI) |
| Impact Resistance | > 6 kJ/m2 |
| Tensile Strength | > 5.5 MPa |
| Density (Specific Mass) | ~1000 Kg/m3 (+/-< 2%) |
| Moisture Absorption | ~26% maximum saturation (slow absorption rate) |
| Moisture Content | ~6% |
| Water Vapour Diffusion | ~28 / 35 |
| Specific Heat | ~930 J/kgK |
| Thermal Conductivity | ~0.44 W / mK |
| Modulus of elasticity | ~6045 N/mm2 |
| Flexibility UNI E 12372 |
~20.1 N/mm2 maximum 12mm x 1220 x 2440 = 10 N/mm2 |
| Surface Alkalinity | ~10 Ph |
| Thermal Expansion Hot/Cold | 0, 01 mm/mC (from temp +20C to -20C) |
| Expansion in Water | less than < 0.02% from ambient to saturation |
| Freeze / Thaw - UNI EN 520 | 100 cycles without notable effects |
| Frost Resistance | no water drops form on surface |
| Combustibility / Fire Ratings | non-combustible / 12mm exceeds 1 hr fire rating |
| Dimensional tolerance | thick 0.2mm / width 2mm / length 3mm / Sq. 3mm |
| Toxicity Pollutants Heavy Metals - UNI EN 12457-2 | Below measurable levels of test instruments |
| Asbestos Analysis | Absent - not measurable |
| Formaldehyde Analysis | Absent - not measurable |
| Sound Attenuation (9mm) | tested design ASTM E90 = STC 48, 50, 55, & 60 |
| Color | Slate Grey and Chalk White |
| Surface texture | smooth one side; uniform machine textured back |
| Basic Compounds | (MgO)+(natural silicates)+(glass fibre)+(wood fibre) |
Contact Person: Kevin
Tel: 86-18254101233
Fax: 86-531-82985999
